millermatic 251 spool gun sorted by
relevance

Admin14.08.2021

Miller Spoolmatic 15A #195156

They are recommending the 251 because they use the mild steel rating then cut it in half for aluminum when using a spool gun.
9802
Admin16.08.2021

miller 251 wire feed delivery problem

When it is not doing it so bad, I can compensate for it by adjusting the distance from the gun to the work piece when it starts pulsing, kind of following the pace of the pulsing feed, but this is a royal PIA.
1803
Admin22.07.2021

Miller 251 Spoolgun Options?

.
Admin20.06.2021

25' HTP replacement Spool Gun f Miller Spoolmatic® 30A Millermatic® 250x 251 252

.
1604
Admin10.07.2021

Miller Spoolmate 150 Spoolgun 301272

The auto set is pretty much worthless also on aluminium I set this up with my Millermatic 140.
1700
Admin08.07.2021

MILLER ELECTRIC Mig Welder, Millermatic® 251 Series, Input Voltage: 208/240V AC

It really makes since that it was doing this sporaticly, when the clamp got hot enough things were not makeing good contact.
8508
Admin03.09.2021

Millermatic 251 with Spoolmatic 30A

I was kind of expecting to hear that it is a power supply problem with the welder.
7507
Admin25.07.2021

Amazing deal on craigslist, 251 + spool gun for $3500

I have not noticed this to be a positional thing with the lead itself, but that is defenitely a possibility.
9409
Admin15.07.2021

210 vs 251 spool gun

Unless what you are seeing as a "pulsating" wire feed speed is really not that at all, but the electrode stubbing into the work during periods of poor work lead contact and than burning off normally once the work lead connection cooled slightly.
2401
Admin20.06.2021

Miller Spoolguns & Spoolgun Adapters

1 m direct-connect cable with heavy-duty strain relief.
7708
Admin29.07.2021

Miller 251 Spoolgun Options?

The tip looked to be fine.
1506